Skip to main content
Call
MVP Mobile Tire & Roadside Assistance
Saw Mill River Parkway roadside assistance, 24/7 mobile tire and roadside assistance

New York highway

Saw Mill River Parkway roadside assistance

Stuck on Saw Mill River Parkway? Get to the shoulder or the next exit, turn on your hazards, and call. If you're blocking a lane or anyone is hurt, call 911 first.

Call (917) 793-0802
Saw Mill River Parkway

Saw Mill River Parkway

Westchester County

Roadside help 24 hours, next exit: MVP

  • Local technicians who know your roads
  • Call anytime fast etas
  • Mobile we come to you
  • 24/7 emergency service

Roadside assistance on Saw Mill River Parkway

The Saw Mill River Parkway is a toll free, passenger vehicle parkway through central Westchester County. It follows the Saw Mill River valley between the southern junction with I-287, the Cross Westchester Expressway, and the northern connection at NY-35 in North Castle, near Bedford. Along the way, it serves Yonkers, Greystone, North Yonkers, Greenburgh, Elmsford, Hawthorne, Mount Pleasant, Valhalla and North Castle. Its route connects residential communities and local roads with major east west and north south routes, including the Taconic State Parkway and the Sprain Brook Parkway. The landscape changes along the drive: southern sections pass through built up parts of Yonkers, while the parkway farther north crosses wooded, hilly stretches and the river valley. The road is a parkway rather than a general purpose truck route. Trucks, trailers and commercial vehicles are prohibited, so drivers must check their route before entering. The parkway has curves and older stone overpasses, including structures with low clearance. Drivers should pay attention to posted restrictions and adjust for wet leaves, ice, congestion and changing road conditions. It is a toll free route, but that does not make it suitable for every vehicle. is part of daily life for drivers in the Westchester County service area, which is why MVP Mobile Tire Shop and Roadside Assistance keeps technicians ready to reach it around the clock. Flat tires, blowouts, dead batteries, lockouts and empty tanks are the problems we see most often on Saw Mill River Parkway, and most are fixed right where you stopped.

At its southern end, the Saw Mill River Parkway connects with I-287, the Cross Westchester Expressway, in the Elmsford and Yonkers area. From there, the route heads north through the Saw Mill River valley and built up sections of Yonkers. It passes the communities of Greystone and North Yonkers before continuing through Greenburgh toward Elmsford. Roadside development and local street connections are more noticeable in these southern stretches, where the parkway serves nearby neighborhoods as well as longer distance traffic. Beyond Elmsford, the parkway continues north through Fairview and Hawthorne, in the Town of Mount Pleasant. The roadway then reaches the Valhalla area and continues through increasingly wooded parts of central Westchester. Connections along the way include NY-119, NY-100, NY-117, the Sprain Brook Parkway and the Taconic State Parkway. These junctions link the parkway with local destinations and other regional roads. North of the Hawthorne and Valhalla corridor, the route continues toward North Castle and its northern connection with NY-35 near Bedford. The landscape and traffic mix change along the way, from more developed southern communities to quieter, wooded stretches farther north. Parkway restrictions apply throughout: trucks, trailers and commercial vehicles are prohibited.

Our technicians are dispatched from inside the Westchester County service area, not from a national call center, so they already know the exits, ramps and frontage roads around Saw Mill River Parkway. That local knowledge is what turns a vague location into a fast arrival.

Where Saw Mill River Parkway runs and what it connects

At the southern end, I-287, also called the Cross Westchester Expressway, provides a connection toward other regional routes and communities. The nearby junction area serves Elmsford and the Yonkers side of the parkway. NY-119 connects the route with local destinations around Elmsford and Greenburgh, while NY-100 links with communities and roads in central Westchester. Farther north, NY-117 provides another connection to nearby local destinations. These state roads make the parkway useful for trips that begin or end away from its main junctions, but drivers should follow the signed direction of travel and confirm their route before setting out. In the Hawthorne area, the Taconic State Parkway offers a north south connection, and the Sprain Brook Parkway provides another regional route. Near the northern end, NY-35 connects the parkway with North Castle and the Bedford area. The Saw Mill is toll free, but its parkway restrictions matter when choosing a connection: trucks, trailers and commercial vehicles may not use it. Check the vehicle rules and the connecting road before planning a trip.

Driving conditions vary along the Saw Mill River Parkway. In the southern part, traffic can slow with commuter travel and activity around Yonkers, Elmsford and the I-287 junction. The road is not uniformly straight or built to modern freeway dimensions. Drivers should expect curves, changing sight lines and older stone overpasses, some with low clearance. Read clearance signs carefully and do not assume a tall vehicle will fit. Rain can make the pavement slick, while fallen leaves can collect on the roadway in autumn and reduce traction, especially through wooded sections. In winter, cold temperatures and shaded pavement can leave patches of ice even when nearby roads appear clear. Leave room to slow down, use headlights when visibility is poor and avoid abrupt steering on curves. Congestion can also build near connections with other parkways and state roads, so watch traffic ahead rather than relying only on the vehicle in front. Conditions can change quickly between the developed southern communities and the more wooded route farther north. Drivers should check current local advisories before travel and obey posted warnings and restrictions.

Because Saw Mill River Parkway ties so many neighborhoods together, we cover the surrounding communities as well, including Greenburgh, Yorktown, Somers, North Castle, Sleepy Hollow, Tuckahoe, North Salem, Armonk, Montrose, Yorktown Heights. If you broke down on a ramp, a frontage road or a nearby surface street, the same dispatch line handles it.

Elmsford and the Cross Westchester junction

The southern junction with I-287, the Cross Westchester Expressway, is a key transition point for drivers entering or leaving the Saw Mill River Parkway. It lies in the Elmsford and Yonkers area, where regional through traffic meets roads serving nearby communities. Drivers should check signs early, select the correct lane in good time and avoid sudden changes as the junction approaches. The parkway continues north from this area through central Westchester, following the Saw Mill River valley. NY-119 is another important connection nearby, linking the parkway with Elmsford and local roads. Since several routes converge in this part of the county, a planned route and attention to road signs are especially useful.

Elmsford is more than a name on a direction sign: it is a local reference point for understanding the southern part of the route. Greenburgh also lies along this section of the parkway, and the roads around the junction serve a mix of local and regional travel. The Saw Mill is toll free, but that does not remove the need to check restrictions before entering. Trucks, trailers and commercial vehicles are prohibited. Conditions around a major junction can change with traffic flow, and queues may form during busy commuting periods. Leave adequate space, watch for vehicles slowing ahead and allow extra time to make a safe connection rather than trying to reach a turn at the last moment.

Yonkers, Greystone and North Yonkers

South of Elmsford, the Saw Mill River Parkway passes through Yonkers, including areas associated with Greystone and North Yonkers. This stretch has a more built up character than wooded portions farther north, with local roads and nearby neighborhoods shaping the surrounding landscape. Drivers using the parkway for a longer trip share the road with people making shorter local journeys. That mix can mean more lane changes and changing traffic speeds, particularly as vehicles approach signed connections. Follow road signs rather than assuming a familiar local street will connect in the direction expected. Curves and older structures are part of the route, so maintain a speed that leaves room to respond.

Greystone and North Yonkers are useful place names for orienting yourself along the southern stretch, but drivers should still rely on signs and current navigation to identify a specific turn. Traffic may become heavier during commuter travel, with slowing around connections and developed sections. Keep a generous following distance, especially when traffic bunches near a curve or an overpass. The parkway is not an unrestricted route for every vehicle: commercial vehicles, trucks and trailers are prohibited. Drivers in a permitted passenger vehicle should also be mindful of low overpasses and posted clearance limits. In rain or winter weather, reduce speed as conditions require and avoid abrupt maneuvers on a winding section.

Hawthorne, Valhalla and Kensico Dam

North of Elmsford, the route reaches Fairview and Hawthorne in the Town of Mount Pleasant, then continues toward Valhalla. This corridor connects with NY-100 and NY-117, as well as the Sprain Brook Parkway and the Taconic State Parkway. The connections serve nearby communities and provide links to other regional routes, so drivers should watch signs and prepare for lane changes before reaching a junction. Roadside conditions shift between developed areas and wooded surroundings. Hawthorne and Valhalla are useful landmarks for following the route through this central section, but they do not replace checking a map for a particular destination.

Kensico Dam is nearby in the Valhalla area, a notable local landmark for understanding this part of Westchester. The parkway carries through traffic past the broader Hawthorne and Valhalla corridor, while connecting roads serve surrounding places in Mount Pleasant. Busy periods can bring slower traffic near junctions, and curves require drivers to look well ahead and keep a safe gap. Leaves on the pavement in autumn and ice in winter can change traction, particularly on shaded stretches. Watch for posted warnings, observe clearance signs at older structures and make route decisions before the final approach to a turn. The passenger vehicle restriction applies here as on the rest of the parkway.

The Saw Mill valley and nearby parks

The Saw Mill River Parkway takes its name from the river valley it follows through central Westchester. The river corridor provides a recurring geographic reference as the road passes from Yonkers and Greenburgh toward Elmsford, Hawthorne, Mount Pleasant and Valhalla. The setting is not the same along the entire route: built up communities and local roads appear in the south, while wooded views become more prominent farther north. Drivers should keep their attention on the road rather than treating the scenery as a reason to look away. Curves and changes in sight distance call for steady speed and enough space to react to traffic.

Parks and open spaces in the broader river valley form part of the landscape around the parkway, though the road itself remains a limited access driving route rather than a place to stop for sightseeing. Do not stop on a shoulder to view the scenery unless a genuine safety need requires it. Plan any visit to a park using its own access roads and posted information. In wet weather, water and fallen leaves can make the road surface slippery; in winter, shaded stretches can hold ice. Conditions may differ from one section to the next, especially where the route passes between wooded and developed areas. Keep both hands available for steering through bends and follow signs for parkway connections.

Commercial vehicle restrictions and route planning

The Saw Mill River Parkway is for passenger vehicles. Trucks, trailers and commercial vehicles are prohibited, so drivers should confirm that both their vehicle and any trailer are allowed before choosing this route. The restriction matters even when the parkway appears to be the most direct connection between two roads. It is not safe to enter and then assume a nearby local street will provide an easy alternative. Plan a permitted route using roads suitable for the vehicle, and check current signs and official travel information before departure. Low clearance at some stone overpasses is an additional reason to verify a route rather than rely on a general map.

Truck drivers should plan around the Saw Mill rather than attempting to use it as a shortcut. Identify a legal regional route that connects the intended origins and destinations, and confirm restrictions on each connecting road. The parkway links with I-287, NY-119, NY-100, NY-117, the Sprain Brook Parkway, the Taconic State Parkway and NY-35, but a connection does not mean every vehicle may use every road. If a route is uncertain, stop somewhere safe before reaching the parkway and verify it. Do not make a sudden turn or reverse on the roadway to avoid a restriction. The route is toll free, but toll status does not change the vehicle prohibition.

Northern end at NY-35 near Bedford

The Saw Mill River Parkway continues north through central Westchester to NY-35 in North Castle, near Bedford. This northern connection serves drivers headed toward local destinations and other roads in the area. North Castle and Bedford are useful place names for orienting yourself at the upper end of the route, but check signs and a current map for the specific turn you need. As the parkway extends north from Valhalla, the setting becomes more wooded and less continuously built up than in parts of Yonkers and Elmsford. Drivers should stay alert for curves, changing visibility and vehicles slowing for connections.

Approaching NY-35, allow time to prepare for the northern connection instead of waiting until the last moment to move into position. Traffic can vary by time and weather, and a quieter stretch does not remove the need to follow posted signs and speed limits. Leaves can make the pavement slick in fall, while ice may persist on shaded sections in winter. The Saw Mill remains a passenger vehicle parkway through its northern reach: trucks, trailers and commercial vehicles are prohibited. If your destination is in Bedford or elsewhere in North Castle, confirm the next road and direction before setting out. Safe planning is especially important if your vehicle has a trailer or unusual height.

The most important tip if you stop on Saw Mill River Parkway

If your vehicle becomes disabled, move as far from moving traffic as you safely can, preferably onto a shoulder or other protected area. Turn on hazard lights. If the vehicle is in a travel lane or stopped in a place with poor sight distance, do not stand beside it facing traffic. Keep passengers together in a safe location away from the roadway, and do not cross lanes to reach an apparently safer spot. Call emergency services or roadside assistance and give the parkway name, direction of travel, nearest signed road or community, and a clear description of the vehicle. Follow the dispatcher's directions. The Saw Mill is a restricted parkway, and trucks, trailers and commercial vehicles are prohibited; do not attempt to continue if your vehicle is not permitted. If the vehicle is near a curve or a low clearance overpass, mention that when calling. Stay alert for approaching traffic, and wait for help in the safest available place. Do not attempt repairs where passing vehicles could put you at risk.

In every case, turn on your hazard lights first. If you can reach the shoulder or an exit, steer there gradually instead of braking hard. Once stopped, keep your seatbelt on and stay in the vehicle when traffic is close. Never stand between the vehicle and moving traffic, and never try to change a tire on the traffic side of the car. If anyone is hurt, or the vehicle is blocking a travel lane, call 911 first, then call us.

When you reach dispatch, share four details: your direction of travel, the last exit or mile marker you passed, the vehicle's year, make, model and color, and what happened. A map pin from your phone is even better. That information lets us send the closest technician with the right equipment on the first trip.

Weather and road conditions on Saw Mill River Parkway

New York winters mean snow, ice and road salt, and the potholes that follow are a leading cause of bent rims and sidewall bubbles.

Highway speed builds heat in a tire faster than city driving does. An underinflated tire flexes more, runs hotter and is far more likely to fail at highway speed. Checking cold tire pressure once a month against the placard on the driver door jamb is the simplest way to avoid a blowout on Saw Mill River Parkway.

Road debris is the other common cause of highway flats: screws, metal from blown truck tires, and pieces of construction material. If a tire is losing air slowly, a plug or patch may still be possible, but driving on a flat ruins the sidewall. Stop early and call, and the repair is usually cheaper.

What we fix on the Saw Mill River Parkway shoulder

Our mobile service vehicles carry what is needed to finish most highway calls in one visit. That includes flat tire repair, roadside assistance, mobile tire repair, jump start service, mobile tire replacement, emergency roadside assistance, mobile tire shop, car lockout service and more.

For tire jobs, we plug or patch punctures in the tread when the repair is safe, mount your spare and torque the lug nuts correctly, or replace the tire with a new or quality used tire in your size. A damaged sidewall, a cut larger than a repairable puncture, or a tire that was driven flat needs replacement, and we will tell you honestly which one you have.

For other problems, we jump start dead batteries and test the charging system, replace batteries on site, deliver fuel when you run dry, open locked vehicles without damage, and winch vehicles out when they slide off the pavement. If a vehicle cannot be fixed on the shoulder, we arrange a tow to your home or the shop you choose.

Commercial vehicles near Saw Mill River Parkway

The Saw Mill River Parkway is a toll free, passenger vehicle parkway through central Westchester County. It follows the Saw Mill River valley between the southern junction with I-287, the Cross Westchester Expressway, and the northern connection at NY-35 in North Castle, near Bedford. Along the way, it serves Yonkers, Greystone, North Yonkers, Greenburgh, Elmsford, Hawthorne, Mount Pleasant, Valhalla and North Castle. Its route connects residential communities and local roads with major east west and north south routes, including the Taconic State Parkway and the Sprain Brook Parkway. The landscape changes along the drive: southern sections pass through built up parts of Yonkers, while the parkway farther north crosses wooded, hilly stretches and the river valley. The road is a parkway rather than a general purpose truck route. Trucks, trailers and commercial vehicles are prohibited, so drivers must check their route before entering. The parkway has curves and older stone overpasses, including structures with low clearance. Drivers should pay attention to posted restrictions and adjust for wet leaves, ice, congestion and changing road conditions. It is a toll free route, but that does not make it suitable for every vehicle. is a parkway that restricts commercial vehicles, so our box truck, trailer and semi truck service in this part of Westchester focuses on the truck routes nearby, including I-287 Cross Westchester Expressway, Taconic State Parkway, Hutchinson River Parkway. Passenger car, SUV, pickup and EV calls on Saw Mill River Parkway itself are handled the same as anywhere else.

Commercial calls go faster when the driver shares the unit number, the position of the failed tire, the tire size printed on the sidewall, and whether the load is hazardous or time sensitive. Fleet managers can set up an account for priority dispatch and consolidated billing.

Other highways we cover near Saw Mill River Parkway

Most drivers who use Saw Mill River Parkway also use I-287 Cross Westchester Expressway, Taconic State Parkway, Hutchinson River Parkway. MVP covers all of them, and we answer calls on every connecting ramp and frontage road in the Westchester County service area.

If you are not sure exactly which road you are on, tell dispatch the last sign you saw, a nearby business or simply share your location. Our team will work out the rest and give you an honest arrival estimate before a technician heads your way.

How much highway roadside help costs

Price depends on what is wrong, the vehicle, the tire size if a tire is needed, the time of day and where on Saw Mill River Parkway you are. A spare installation on a sedan costs less than a new commercial tire at 2 a.m., and we explain the difference before you agree.

You get a firm quote by phone or text before dispatch. The number you approve is the number you pay. If the job turns out simpler than expected, you pay less, and if we cannot fix it, you do not pay for parts you did not receive.

Saw Mill River Parkway through the Westchester County service area

In the Westchester County service area, Saw Mill River Parkway is one of 4 major roads our technicians cover every day, alongside I-287 Cross Westchester Expressway, Taconic State Parkway, Hutchinson River Parkway. Drivers from Greenburgh, White Plains, Rye, Mount Pleasant, Cortlandt, Ossining and 54 more communities use it to reach work, school, airports and shopping.

When you call about a breakdown on Saw Mill River Parkway near Greenburgh, dispatch routes the closest available technician in the Westchester County area. If you would rather move off the highway first, we can meet you at the nearest safe parking lot, gas station or side street instead.

Commuting on Saw Mill River Parkway? Prevent the next roadside call

Most highway tire failures start as small problems: a slow leak, uneven wear or a tire that has aged out. If you drive Saw Mill River Parkway every day, MVP can rotate your tires, check tread depth and pressure, and replace worn tires at your home or office before they fail at highway speed.

Scheduled mobile service means no waiting room and no lost afternoon. We bring the tires, mount and balance them where you park, and you are ready for your next trip on Saw Mill River Parkway without a detour to a shop.

Electric vehicles on Saw Mill River Parkway

EVs are heavier than similar gas vehicles, so their tires work harder on long highway runs like Saw Mill River Parkway. Tesla, Rivian, Ford Mustang Mach-E and other EV owners can call MVP for EV-rated tire replacement and careful lifting at the correct jack points, so the battery pack is never at risk.

If your EV's range is running low on Saw Mill River Parkway, tell dispatch the charge level and your location. Our team can help you plan the safest next step and handle any tire or roadside issue on site.

Save the number before you need it

The middle of a breakdown on Saw Mill River Parkway is the wrong time to compare roadside companies. Save MVP's dispatch line in your phone now, and share it with family members who drive The Saw Mill River Parkway is a toll free, passenger vehicle parkway through central Westchester County. It follows the Saw Mill River valley between the southern junction with I-287, the Cross Westchester Expressway, and the northern connection at NY-35 in North Castle, near Bedford. Along the way, it serves Yonkers, Greystone, North Yonkers, Greenburgh, Elmsford, Hawthorne, Mount Pleasant, Valhalla and North Castle. Its route connects residential communities and local roads with major east west and north south routes, including the Taconic State Parkway and the Sprain Brook Parkway. The landscape changes along the drive: southern sections pass through built up parts of Yonkers, while the parkway farther north crosses wooded, hilly stretches and the river valley. The road is a parkway rather than a general purpose truck route. Trucks, trailers and commercial vehicles are prohibited, so drivers must check their route before entering. The parkway has curves and older stone overpasses, including structures with low clearance. Drivers should pay attention to posted restrictions and adjust for wet leaves, ice, congestion and changing road conditions. It is a toll free route, but that does not make it suitable for every vehicle. too.

Calls and texts are answered around the clock, including nights, weekends and holidays, by a team that covers the Westchester County service area every day. Call, text or book online, and we will get you back on the road.

FAQ

Saw Mill River Parkway roadside assistance: questions

Quick answer

Who offers roadside assistance on Saw Mill River Parkway in New York?

MVP Mobile Tire Shop and Roadside Assistance covers Saw Mill River Parkway in New York 24/7 with mobile tire repair, spare tire changes, jump starts, fuel delivery and semi truck tire service on the shoulder. Pull off safely, turn on your hazards and call or text dispatch with your direction and nearest exit. Call 911 first if anyone is hurt.

Yes. MVP covers The Saw Mill River Parkway is a toll free, passenger vehicle parkway through central Westchester County. It follows the Saw Mill River valley between the southern junction with I-287, the Cross Westchester Expressway, and the northern connection at NY-35 in North Castle, near Bedford. Along the way, it serves Yonkers, Greystone, North Yonkers, Greenburgh, Elmsford, Hawthorne, Mount Pleasant, Valhalla and North Castle. Its route connects residential communities and local roads with major east west and north south routes, including the Taconic State Parkway and the Sprain Brook Parkway. The landscape changes along the drive: southern sections pass through built up parts of Yonkers, while the parkway farther north crosses wooded, hilly stretches and the river valley. The road is a parkway rather than a general purpose truck route. Trucks, trailers and commercial vehicles are prohibited, so drivers must check their route before entering. The parkway has curves and older stone overpasses, including structures with low clearance. Drivers should pay attention to posted restrictions and adjust for wet leaves, ice, congestion and changing road conditions. It is a toll free route, but that does not make it suitable for every vehicle. throughout the Westchester County service area, 24 hours a day, including nights, weekends and holidays.

Turn on your hazards, move gradually to the shoulder or the next exit, and stay buckled in the vehicle if traffic is close. If your vehicle becomes disabled, move as far from moving traffic as you safely can, preferably onto a shoulder or other protected area. Turn on hazard lights. If the vehicle is in a travel lane or stopped in a place with poor sight distance, do not stand beside it facing traffic. Keep passengers together in a safe location away from the roadway, and do not cross lanes to reach an apparently safer spot. Call emergency services or roadside assistance and give the parkway name, direction of travel, nearest signed road or community, and a clear description of the vehicle. Follow the dispatcher's directions. The Saw Mill is a restricted parkway, and trucks, trailers and commercial vehicles are prohibited; do not attempt to continue if your vehicle is not permitted. If the vehicle is near a curve or a low clearance overpass, mention that when calling. Stay alert for approaching traffic, and wait for help in the safest available place. Do not attempt repairs where passing vehicles could put you at risk.

Share your direction of travel, the last exit or mile marker and a nearby landmark, or send a map pin from your phone. That is enough for dispatch to find you.

It depends on your exact location, traffic and technician availability at that moment. Dispatch gives you an honest estimate before the technician leaves.

Usually, yes. We repair safe punctures, install spares, or replace the tire with a new or quality used tire, as long as the spot is safe to work in.

The Saw Mill River Parkway is a toll free, passenger vehicle parkway through central Westchester County. It follows the Saw Mill River valley between the southern junction with I-287, the Cross Westchester Expressway, and the northern connection at NY-35 in North Castle, near Bedford. Along the way, it serves Yonkers, Greystone, North Yonkers, Greenburgh, Elmsford, Hawthorne, Mount Pleasant, Valhalla and North Castle. Its route connects residential communities and local roads with major east west and north south routes, including the Taconic State Parkway and the Sprain Brook Parkway. The landscape changes along the drive: southern sections pass through built up parts of Yonkers, while the parkway farther north crosses wooded, hilly stretches and the river valley. The road is a parkway rather than a general purpose truck route. Trucks, trailers and commercial vehicles are prohibited, so drivers must check their route before entering. The parkway has curves and older stone overpasses, including structures with low clearance. Drivers should pay attention to posted restrictions and adjust for wet leaves, ice, congestion and changing road conditions. It is a toll free route, but that does not make it suitable for every vehicle. is not generally a toll road, though nearby express or managed lanes can carry tolls. Our technicians cover the general lanes, shoulders and ramps.

The Saw Mill River Parkway is a toll free, passenger vehicle parkway through central Westchester County. It follows the Saw Mill River valley between the southern junction with I-287, the Cross Westchester Expressway, and the northern connection at NY-35 in North Castle, near Bedford. Along the way, it serves Yonkers, Greystone, North Yonkers, Greenburgh, Elmsford, Hawthorne, Mount Pleasant, Valhalla and North Castle. Its route connects residential communities and local roads with major east west and north south routes, including the Taconic State Parkway and the Sprain Brook Parkway. The landscape changes along the drive: southern sections pass through built up parts of Yonkers, while the parkway farther north crosses wooded, hilly stretches and the river valley. The road is a parkway rather than a general purpose truck route. Trucks, trailers and commercial vehicles are prohibited, so drivers must check their route before entering. The parkway has curves and older stone overpasses, including structures with low clearance. Drivers should pay attention to posted restrictions and adjust for wet leaves, ice, congestion and changing road conditions. It is a toll free route, but that does not make it suitable for every vehicle. restricts commercial vehicles, so truck tire calls in this area are handled on nearby truck routes such as I-287 Cross Westchester Expressway and Taconic State Parkway.

If the problem cannot be solved on the roadside, we arrange towing to your home, your mechanic or the shop of your choice.

Yes. We jump start the vehicle, test the battery and charging system, and can replace the battery on the spot if it will not hold a charge.

We also cover I-287 Cross Westchester Expressway, Taconic State Parkway, Hutchinson River Parkway and the connecting roads across the Westchester County service area.

It depends on the service, vehicle, tire size and time. You get a firm quote before dispatch, and the price you approve is the price you pay.

Call 911 first if anyone is hurt, the vehicle is blocking a lane or you are in immediate danger. Once everyone is safe, call MVP for the roadside repair.
Call